[cisco-voip] deploying qos on my edge router

[James Grace]

What would be the best way to apply MQC  on our edge routers  for voice.  If
I want to priorities the traffic and allocate the bandwith.  But I have no
ideal how much bandwith to allocate for voice.  Most of our voice traffic
will be from incoming calls with no answer and them going over the wan to
geto unity VM.  Unity is set for g729  and my remote site are set to 729 for
site to site and 711 for local 

Using MQC

 

 

James D. Grace 

CCNP CCNA MCSE MCSA 

Digitel Corporation

System Engineer / Professional Svc.

MSN messenger ID:  jgrace29 at hotmail.com

Mac IChat ID:  jgrace29 at mac.com

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060830/ca45f0fb/attachment.html