[cisco-voip] Phone Rings & Volume Set to Defaults After Reboot

[Johan Bloemhard]

The office personnel would like to have their main incoming line set to
a common ring and volume, and unique rings for their personal DN. The
main driver is that a higher emphasis is placed on answering the main
incoming line than their personal DN.

 

For instance, they pick what they want for their personal DN customized
ring as the "Default Ring" and then for the second DN, I choose "Ring 3"
(which should be the common incoming ring).  I also make adjustments to
their ring volume.

 

However, whenever the phone is rebooted, the "Default Ring" is kept but
the second DN is now set to the same as "Default Ring" rather than "Ring
3".  Additionally the volume defaults back to the midpoint in the range.

 

These phones are 7941s.

 

Is this normal behavior? 

 

Johan Bloemhard 
Senior Information Technology Specialist 
___________________________________ 
Silver Falls School District 4J 
802 Schlador Street 
Silverton, OR 97381 
w: 503.873.6331 

 


______________________
Disclaimer: This message may be legally privileged and/or is intended only for the use of the addressee(s).  The content and views expressed in this email may represent the views of the sender and not those of Silver Falls School District. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060831/b103d444/attachment.html