[cisco-voip] Partition strange issue

[Kevin Thorngren]

Hi Ruben,

Every call will use the CSS to determine where a call is directed.  A 
device can be assigned to a particular Partition but that doesn't mean 
it will be able to call other divices in that Partition.  The CSS 
assigned to that device will need to have the Partition.

Yes, you will need a different CSS for each city.

HTH,
Kevin
On Dec 1, 2006, at 4:35 AM, Ruben Montes ((Europe)) wrote:

> Hello,
>
> I'm having an issue that I don't understand why is happening...
>
> I have a partition for every city than my customer has IP Telephony. 
> CSS is more or less the same for every city. We have a gateway in each 
> city. There are some telephone numbers that are different depending 
> from where you are calling (police, information of the city). I have 
> created a route pattern with this numbers for every of this cities, 
> only changing the partition and the route list.
>
> Then if I call from telephone number 4444 that is in partition cityA 
> to police number, that has a route pattern with partition cityA, this 
> call goes to cityB, that is the first partion in the order of the CSS 
> associated to the dial number.
>
> I don't understand this behaviour because I thought that if the route 
> pattern is located is the same partition, it should not use the 
> CSS. The Dial Number Analyzer shows also that this call is going to 
> the CSS.
>
> What am I doing wrong? Are my assumptions incorrect? Should I then 
> create a CSS for each city?
>
> Thanks in advance,
>
> Ruben 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip