[cisco-voip] 2851 and 12 T1s

[STEVEN CASPER]

What do you do if you have multiple potential clocking sources? It is
likely at a site that you can have connections to Local and Long
Distance service providers as well as to a PBX. 

Steve

>>> "Craig M Staffin" <cmstaffin at ra.rockwell.com> 11/30/06 2:43 PM >>>
Biggest problem is going to be that the 2851 can only have one clocking

source.  So if all 12 terminate to the same CO switch you are fine 
otherwise you will have timeing issues.

Craig




"Wydra, Jason" <jason.wydra at berbee.com> 
Sent by: cisco-voip-bounces at puck.nether.net 
11/30/2006 01:22 PM

To
<cisco-voip at puck.nether.net>
cc

Subject
[cisco-voip] 2851 and 12 T1s






Any issue with terminating 12 T1s into a 2851? I have a mixture of PRI
and 
T1 CAS. 6 2MFT-T1 cards. Does this router have the horsepower?
 
Jason Wydra
Berbee
Cisco Voice Engineer
8725 West Higgins Road, Suite 700
Chicago, Il. 60631
IP phone 773.867.6084
Cell 630-209-9792
Jason.Wydra at berbee.com 
www.berbee.com 
 

 _______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip