[cisco-voip] Dead 7912? (RESOLVED)

[Johan Bloemhard]

Nevermind my previous email.  I was finally able to get it up and reset
factory defaults and it works fine now.

 

Thanks anyways!

 

Johan Bloemhard 
Senior Information Technology Specialist 
___________________________________ 
Silver Falls School District 4J 
802 Schlador Street 
Silverton, OR 97381 
w: 503.873.6331 

________________________________

From: Johan Bloemhard 
Sent: Friday, December 01, 2006 8:47 AM
To: cisco-voip at puck.nether.net
Subject: Dead 7912?

 

I have a 7912 that takes forever on boot-up cycle and never actually
completes the boot-up cycle.  Does anyone have directions for manually
forcing a reload of the firmware on the 7912?  

 

I have a TAC case ID that discusses this for the 7970 with the following
steps (this obviously doesn't work for the 7912):

1.	Power off the phone. 
2.	Hold down the # key. 
3.	While holding #, connect an AC adaptor to the phone. 
4.	Continue to hold # until the line buttons blink amber. 
5.	Release the # key. 
6.	Enter 3491672850*# 
7.	The lights should change color from amber to red. When this
occurs, the phone is resetting to factory defaults. 

Anyone have any information that will assist me?

 

Thanks!

 

Johan Bloemhard 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061201/41236689/attachment.html