[cisco-voip] Meridian Call Routing

[Jonathan Charles]

Yep, that is exactly what I was looking for... Cool... I will see if I can
get access to the Meridian and try it...

thnx



Jonathan

On 12/4/06, Vince Loschiavo <VLoschiavo at data-corporation.com> wrote:
>
>  Yes there is a way to do this.
>
> My customer is going very slowly on this as well.
>
> The config on the Meridian:  No clue as to exact syntax: but you can point
> specific DIDs to your QSIG trunk to CCM.
> CCM config:
> 1) Setup the phones and Directory Numbers as usual.
> 2) Create a all inclusive route pattern to the Nortel/Meridian;  ie.
> 2[3-9]XX  (or whatever) to the QSIG.   the CCM will only route DNs it
> doesn't have configured over that QSIG.
>
> Make sense?
>
> -Vince
>
>
>
>  ------------------------------
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* Monday, December 04, 2006 11:27 AM
> *To:* cisco voip
> *Subject:* [cisco-voip] Meridian Call Routing
>
> Customer is migrating (way too slowly) from Meridian to VoIP
> (CallManager).
>
> Customer has around 300 phones, they want to move 50 phones over to
> CallManager (already in place), but the phones are random (I cannot figure
> out how they were picked).
>
> These 100 phones are intermixed (DID-wise, so extensions 2940-2340 are on
> the PBX, 2341, will be moved, 2342 will stay on the PBX, etc...) all calls
> come in on six PRIs, which are connected to the Meridian... Selecting a
> contiguous range of DIDs is not an option.
>
> Can I route individual DIDs over a QSIG trunk to the CCM? (IOW, call comes
> into PBX for x2341, gets routed over QSIG to 2851 for CCM)? Or only blocks?
>
>
>
> Thanx...
>
>
>
> Jonathan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061204/f802a637/attachment.html