[cisco-voip] Server not seeing harddrive

[Martin Lohnert]

Since you're trying to install CCM on a supported hardware, you should be
using the Cisco CDs/DVDs that came with it - the first one will install
Windows with all the drivers for you...
Cheers,
ML


On 12/5/06, Wydra, Jason <jason.wydra at berbee.com> wrote:
>
>  I have a 7835H server that I'm trying to load CallManager on. I created
> the RAID Array (RAID 0). If I put in a Windows server it loads to the point
> where it tells me to hit enter to begin a new installation. It then comes
> back and tells me there are no hard drives. I tried hitting F6 during the
> load and loading the SCSI driver manually. I downloaded the driver off HP
> and put it on a floppy. When it prompts me to put the floppy in it tells me
> a file is missing.
>
>
>
> I have the HP platform CD and I loaded all of the firmware and drivers.
> I'm at a loss.
>
>
>
> Regards,
>
>
>
> Jason Wydra
>
> Berbee
>
> Cisco Voice Engineer
>
> 8725 West Higgins Road, Suite 700
>
> Chicago, Il. 60631
>
> IP phone 773.867.6084
>
> Cell 630-209-9792
>
> Jason.Wydra at berbee.com
>
> www.berbee.com
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061205/f0de1414/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 2615 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20061205/f0de1414/attachment.jpg