[cisco-voip] Call transfer not working

[Curt Shaffer]

This problem is an extension to my dial-pattern issue but it almost seems to
warrant a new thread. Basically this is what I am seeing.

We wanted to set our outbound caller ID because the phone company was
expecting more digits than we where sending. To accomplish this I did the
following:

telephony service

dial-pattern 1 703555.... extension length 4

Now this works for setting the digits as needed but when this command is in
place calls from outside cannot be transferred to internal extensions
(although they can be parked) and when calls come into a line directly, if
unanswered they do not go to voice mail the call just fails. 


Any suggestions?

Thanks

Curt