[cisco-voip] Minimum hardware for CallManager 5

[Matt Slaga (US)]

You need to make sure you have the exact hardware specs for ccm5.  It is
extremely picky.  I found a dl320 on ebay for about $1k that works fine,
G4 2.8 2MB dual core,  you need (2) 80gb sata drives and 2gb ram to
boot.  If the processor does not meet the specs exactly, it will claim
incompatible hardware.

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Sunday, December 10, 2006 1:07 AM
To: cisco voip
Subject: [cisco-voip] Minimum hardware for CallManager 5


OK, so I have officially given up, I am not going to quest out a way to
get CCM5 to run on VMWare (however, if someone has access to it, and
emailed it to me, you wouldn't hear any complaints).

So, I need to buy a server, I was thinking an HP DL320, with a 3.0GHz
Xeon, 2GB of RAM and an 80GB SATA drive...

It meets the hardware requirements on spec for processor, RAM and hard
drive... but will CCM5 like it?



Jonathan




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061210/23a8d5c8/attachment.html