[cisco-voip] Synchronizing Call Manager and Call Manager Express

[Jonathan Charles]

If the phone is hanging off the CME, you would just configure it on CME.

You then have a  route pattern that points all calls with 43XX (or whatever)
to a trunk that goes to CME.

Easy peesy.

Unless you are trying to accomplish something else with the phone?




Jonathan

On 12/11/06, Robert Kulagowski <bob at smalltime.com> wrote:
>
> In our deployment, we use SRST for when the WAN link goes out.  SRST is
> kind of feature-limited, but the good part is that it doesn't need a
> whole lot of configuration.
>
> I'm just starting to go through the docs for CME, but as I understand
> it, there's a whole lot more configuration that has to be done to get
> phones working in CME mode.  If I create a phone in Call Manager, is
> there anything that will allow me to create the same phone in CME, or am
> I going to be performing administration on two separate devices in that
> instance?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061211/10a5d768/attachment.html