[cisco-voip] QRT Viewer Jitter column question

[Erick Bergquist]

Wes,

The columns are the dest jitter and source jitter.   The result for a entry is 2 values for dest and source jitter. I am trying to veriy what the 2 numbers mean , or if it is just 2 jitter results for that call? Is it in milliseconds?

So in QRT report, for one problem call:

dest jitter:    1,49
 
source jitter:  15,54

And another problem call has:

dest jitter     1,49
 
source jitter   13,33
 
 
Thanks, Erick

----- Original Message ----
From: Wes Sisk <wsisk at cisco.com>
To: Erick Bergquist <erickbe at yahoo.com>
Cc: ciscovoip <cisco-voip at puck.nether.net>
Sent: Thursday, December 14, 2006 11:58:27 AM
Subject: Re: [cisco-voip] QRT Viewer Jitter column question

Erick,

I'm not in front of one right now, but is the column called "dest and 
source jitter"? if so, i'd expect the 2 values to be the jitter values 
from the 2 endpoints.

/Wes

Erick Bergquist wrote:
> Hi,
>
> In the Dest and source Jitter column,  does anyone know what the multiple results mean? The Cisco QRT docs do not really describe the results. 
>
> Some results I have are 1,49  and 6,83, and 15,54, and 3,44, etc.
>
> Thanks, Erick
>
>
>
>  
> ____________________________________________________________________________________
> Yahoo! Music Unlimited
> Access over 1 million songs.
> http://music.yahoo.com/unlimited
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   





 
____________________________________________________________________________________
Any questions? Get answers on any topic at www.Answers.yahoo.com.  Try it now.