[cisco-voip] direct-inward-dial

[Jonathan Charles]

Direct Inward Dial means that the digits that telco sends you should be
forwarded to CallManager for a match to a directory number,
translation-pattern or CTI Route-Point, etc. on CallManager.

Non-DID means that the port will ring and be forward by a connection plar or
attendant-DN to go to a common location.




Jonathan

On 12/18/06, kevin k <kds850 at gmail.com> wrote:
>
> i was browing around and did the following steps.
>
> vg(config-dial-peer)#?
> ---------omit--------
> direct-inward-dial     Use Called Number as final call destination
>
>
> ?
> i dont understand.
> can someone explain this?
>
> thanks in advance.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061218/6bb3f6c0/attachment.html