[cisco-voip] direct-inward-dial

[Voll, Scott]

This is used with PRI's and DID's if you have a block of 1xxx and you
dial xxx-xxx-1xx1 then is should go to 1xx1 extension.

 

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of kevin k
Sent: Monday, December 18, 2006 10:12 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] direct-inward-dial

 

i was browing around and did the following steps.

vg(config-dial-peer)#?
---------omit--------
direct-inward-dial     Use Called Number as final call destination


?
i dont understand.
can someone explain this? 

thanks in advance.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061219/aadf42e0/attachment.html