[cisco-voip] Rewriting incoming caller ID using CallManager /router?

[Riley, Andrew]

translation patterns match the called number, hence you can not
distinguish between external parties with translation rules. 

You could do this with voice translation rules under H323, but not with
MGCP. I assume all inbound calls come via the PSTN and there are no
intercluster or VOIP trunks? If there were you could reformat the number
out bound on the remote endpoints.

Andrew

 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert
Kulagowski
Sent: Wednesday, 20 December 2006 8:43 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Rewriting incoming caller ID using CallManager
/router?

Is there some way to rewrite incoming caller ID information using just
callmanager / routers?  We have a 6-digit dial plan, and I'd like for
calls coming from one of our offices to be reformatted so that it's
presented to the caller as sitecode+XXXX (rather than 10 digits)

The inbound voice gateways are MGCP, and I don't believe I can use
translation patterns and rules on the voice ports to manipulate the
digits.

Any thoughts?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip