[cisco-voip] OT: ISR

[Jonathan Charles]

Sure, sort of.

You can stuff a VWIC-2MFT-T1 into one of the WIC/VIC slots...

http://www.cisco.com/en/US/products/ps5853/products_relevant_interfaces_and_modules.html

However, the bad thing is this:

http://www.cisco.com/en/US/products/ps5853/products_qanda_item0900aecd80181208.shtml

"PVDMs suppported: None; Cisco 1841 does not support voice termination"


So, data T1s  good... voice T1s (PRI or CAS) bad.




Jonathan



On 12/20/06, Voll, Scott <Scott.Voll at wesd.org> wrote:
>
>  Can anyone tell me if I can run two t1's through a little 1841?
>
>
>
> Scott
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061220/d6b71021/attachment-0001.html