[cisco-voip] SRST question

[Lelio Fulgenzi]

First, thanks to the list for helping me get my old 3640 working. Some of you emailed me offline and others posted excellent responses that I found in the archives.

Anyways, I've got SRST working and I'm just wondering about Step 2 described here, namely:

      Step 2  
     ip source-address ip-address [port port] [any-match | strict-match] 

      Example: 
      Router(config-cm-fallback)# ip source-address 10.6.21.4 port 2002 strict-match 
     Enables the router to receive messages from the Cisco IP phones through the specified IP addresses and provides for strict IP address verification. The default port number is 2000. 
     


What do they want for the source IP address? Is this the IP address that will eventually be programmed as an SRST resource on CallManager? IE, whatever SRST IP address appears on the phone should be the IP address here?




--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061221/add0c180/attachment.html