[cisco-voip] SRST question

[Voll, Scott]

It's the IP of the router that the phones will register will.  IE> the
FE not a Serial as if your in SRST most likely it's the Serial that
would be down.  It is also the IP you will configure in SRST on the CM.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Thursday, December 21, 2006 2:35 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] SRST question

 

First, thanks to the list for helping me get my old 3640 working. Some
of you emailed me offline and others posted excellent responses that I
found in the archives.

 

Anyways, I've got SRST working and I'm just wondering about Step 2
described here
<http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_configu
ration_guide_chapter09186a00803927ae.html#wp1331691> , namely:

 

Step 2  

ip source-address ip-address [port port] [any-match | strict-match] 

Example: 

Router(config-cm-fallback)# ip source-address 10.6.21.4 port 2002
strict-match 

Enables the router to receive messages from the Cisco IP phones through
the specified IP addresses and provides for strict IP address
verification. The default port number is 2000. 

 

What do they want for the source IP address? Is this the IP address that
will eventually be programmed as an SRST resource on CallManager? IE,
whatever SRST IP address appears on the phone should be the IP address
here?

 

 

 

 

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061221/2e78602e/attachment.html