[cisco-voip] Cannot register 2801 with mgcp to ccm 4.1(3)

[Jason Aarons (US)]

BRI MGCP is new to 12.4T check you IOS image for caveats, consider
upgrading IOS if not working. Also check you CallManager service release
to see if BRI is supported -jason

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Wednesday, December 27, 2006 2:36 PM
To: Anthony Kouloglou
Cc: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] Cannot register 2801 with mgcp to ccm 4.1(3)

 

Well, we still need to bind layer 3 to callmanager (on the int bri0/0":0
or whatever).

Then make sure you configure the BRI on the CCM side...



Jonathan

On 12/27/06, Anthony Kouloglou <akoul at dataways.gr> wrote:

Thanks Jonathan,
but i only have a single bri.
i am trying to get used with mgcp configuring a simple scenario because
i have only be using h323 so far.
Do you know what could be wrong with the config?
I will send you anything you may require.

Thanks


Jonathan Charles wrote: 

The endpoints will only register if they are up.

So, if you register a PRI, and the PRI is down, it will show as
unregistered. This is a good thing (from the perspective of CCM, as it
then knows not to route calls to a down PRI). 

Is your PRI up?

Do a show isdn status, is multiple frame established?

On the controller did you include the following:

 pri-group timeslots 1-24 service mgcp

On the serial port for the PRI, do you have: 

 isdn bind-l3 ccm-manager

If not, the PRI (presuming it is a PRI) will NEVER register with CCM.

Also, make sure you are not blocking ports 2427 and 2428...




Jonathan

On 12/27/06, Anthony Kouloglou <akoul at dataways.gr > wrote: 

Hi all,
although when i give sh ccm-manager i see that the mgcp gateway is
registered at the ccm
at the ccm web page i get not registered for the endpoint.

This is the debugging from the 2801 running
c2801-spservicesk9-mz.123-11.T11.bin

*Dec 27 13:55:41.027: * mgcp_msg_ack: Setting the restart method to NONE
*Dec 27 13:55:41.027: mgcpapp_process_socket
*Dec 27 13:55:41.031: mgcpapp_process_mgcp_msg : socket drained.
*Dec 27 13:55:56.027: mgcpapp_process_mgcp_msg : socket drained.
*Dec 27 13:55:56.027: MGCP sys msg: (15)
*Dec 27 13:55:56.027: xlate sys msg: (15, 6432D16C)
*Dec 27 13:55:56.027: sys msg values: (INVALID MGCP EVENT, 65280,  ,
1618424048, CALL_IDLE)
*Dec 27 13:55:56.027: process mgcp_handle_cmapp_event
*Dec 27 13:55:56.027: mgcp_cmapp_send_keepalive send NTFY KeepAlive
*Dec 27 13:55:56.027: send_mgcp_empty_notify_msg: endpt *,
complete_endpt *@mgcp
*Dec 27 13:55:56.027: * mgcp_get_ca_addr_port:
*Dec 27 13:55:56.027: * mgcp_get_ca_addr_port: Used endpoint NE
192.168.2.5:2427
*Dec 27 13:55:56.027: * mgcp_get_ca_addr_port: NE addr 192.168.2.5:2427
*Dec 27 13:55:56.027: * mgcp_enq_retx_msg: trans_id 12,ntfy_ent
192.168.2.5:2427
*Dec 27 13:55:56.027: * mgcp_root_get_profile:
*Dec 27 13:55:56.027: mgcp_add_trans_id_rec: Add trans id (12, 637CFB40)
record
*Dec 27 13:55:56.027: mgcp_stw_timer_start timer type 0, duration 500
*Dec 27 13:55:56.027: send_mgcp_empty_notify_msg NTFY Packet sent
successfully - *
*Dec 27 13:55:56.027: MGC stat - 192.168.2.5, total=15, succ=10,
failed=4
*Dec 27 13:55:56.027: mgcpapp_process_mgcp_msg : processing received
message.
*Dec 27 13:55:56.027: * mgcp_msg_ack
*Dec 27 13:55:56.027: MGC stat - 192.168.2.5, total=15, succ=11,
failed=4
*Dec 27 13:55:56.027: * mgcp_msg_ack: Removing msg : NTFY 12 *@mgcp MGCP
0.1
X: 0
O: 

thanks all


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061227/dfba12e3/attachment-0001.html