[cisco-voip] Catalyst 6608 T1 module

[Mendoza, Anthony R]

That's what I thought :( someone had an idea for a clustered TFTP server
config..  that's an idea, but doesn't give me dual sites to be able to
grab from.  Oh well.

Thanks for all the suggestions.

-Anthony
-----Original Message-----
From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, January 31, 2006 10:42 PM
To: Mendoza, Anthony R
Cc: Cisco VoIP
Subject: Re: [cisco-voip] Catalyst 6608 T1 module

not possible with static config.  CSCea68405.
only option is DHCP.

/Wes

On Jan 31, 2006, at 5:03 PM, Mendoza, Anthony R wrote:

All,
 
Is there a way to assign multiple TFTP servers in a config on a 6608
when running CatOS and not using DHCP?  I find when I'm going a static
IP configuration that I can only assign a single TFTP server which
doesn't give me much failover in a situation where I lose a CCM and for
some reason the device resets (such as a power outage).  I'd be forced
to go re-configure it in order to receive it's configuration.  Any way
around that hassle?
 
Thanks,
-Anthony
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip