[cisco-voip] Catalyst 6608 T1 module

[Davis, Michael]

How about Anycast?
 
http://www.pch.net/resources/tutorials/anycast/Anycast-v10.pdf
 

	-----Original Message----- 
	From: cisco-voip-bounces at puck.nether.net on behalf of Mendoza, Anthony R 
	Sent: Wed 2/1/2006 9:32 AM 
	To: Wes Sisk 
	Cc: Cisco VoIP 
	Subject: RE: [cisco-voip] Catalyst 6608 T1 module
	
	

	That's what I thought :( someone had an idea for a clustered TFTP server
	config..  that's an idea, but doesn't give me dual sites to be able to
	grab from.  Oh well.
	
	Thanks for all the suggestions.
	
	-Anthony
	-----Original Message-----
	From: Wes Sisk [mailto:wsisk at cisco.com]
	Sent: Tuesday, January 31, 2006 10:42 PM
	To: Mendoza, Anthony R
	Cc: Cisco VoIP
	Subject: Re: [cisco-voip] Catalyst 6608 T1 module
	
	not possible with static config.  CSCea68405.
	only option is DHCP.
	
	/Wes
	
	On Jan 31, 2006, at 5:03 PM, Mendoza, Anthony R wrote:
	
	All,
	
	Is there a way to assign multiple TFTP servers in a config on a 6608
	when running CatOS and not using DHCP?  I find when I'm going a static
	IP configuration that I can only assign a single TFTP server which
	doesn't give me much failover in a situation where I lose a CCM and for
	some reason the device resets (such as a power outage).  I'd be forced
	to go re-configure it in order to receive it's configuration.  Any way
	around that hassle?
	
	Thanks,
	-Anthony
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	
	
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip