[cisco-voip] Re: Dialing 9 for outside line

[steve.siltman at assurant.com]

Here's a fun one.  I'm using a route pattern 9.XXXXXXX for local 7 digit 
dialing.  When I dial 9 for an outside line.. I don't hear dial tone until 
I've pressed another number. 

Example:
Dialing 9 then a 5 (now I hear dial tone) then another 5 (dial tone goes 
away) and the next 5 digits and the call routes fine.

Thanks for any input.

Steve Siltman
Assurant, Inc.
Senior Network Analyst
Work: 651-361-4752
Cell: 651-336-5563
steve.siltman at assurant.com
**************************************************************************************
This e-mail message and all attachments transmitted with it may contain legally privileged and/or confidential information intended solely for the use of the addressee(s). If the reader of this message is not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, forwarding or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message and all copies and backups thereof.

Thank you.
**************************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060206/badd5ba3/attachment.html