[cisco-voip] CallManager Tone Configuration

[Leetun, Rob]

No you cannot config a ring tone in CM.  You need to create it and then
import it into CM.  On the Cisco site there is a document on how to do
this.  Please be aware, that this ring type will be available to all
phones in your system.
 
Rob

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Alan Su
Sent: Monday, February 13, 2006 4:55 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CallManager Tone Configuration


Dear All,
 
I was wondering if the tone heard from IP Phone can be configured in
CallManager?
'Cuz one of my customer complained that the IP Phones they are using
which are registered to different CallManagers present different tone
when off-hook. I read the CCM admin guide but didn't find anything about
this, only the locale might affect the tone. Does anyone have idea how
to fix it? Any comment would be grateful. Thanks a lot~ 
 
 
Regards,
 
 
Alan
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060213/3c7caa7e/attachment.html