[cisco-voip] CallManager Tone Configuration

[Tim Frazee]

I don't think he was talking about ringtones,

I think he was referring to dial tone.

I don't know of a way to change it, maybe its a wav file that can be swapped out? How does the other customer have his changed?




Sent from my Treo:

Tim Frazee
314.249.8697

-----Original Message-----

From:  "Leetun, Rob" <rleetun at co.boulder.co.us>
Subj:  RE: [cisco-voip] CallManager Tone Configuration
Date:  Mon Feb 13, 2006 7.50 am
Size:  1K
To:  "Alan Su" <cj.alan at gmail.com>, <cisco-voip at puck.nether.net>

     No you cannot config a ring tone in CM. You need to  create it and then import it into CM. On the Cisco site there is a  document on how to do this. Please be aware, that this ring type will be  available to all phones in your system.
 
 Rob

   From: cisco-voip-bounces at puck.nether.net  [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Alan  Su
Sent: Monday, February 13, 2006 4:55 AM
To:  cisco-voip at puck.nether.net
Subject: [cisco-voip] CallManager Tone  Configuration


 
 Dear All,
 
 I was wondering if the tone heard from IP Phone can be configured in  CallManager?
 'Cuz one of my customer complained that the IP Phones they are using which  are registered to different CallManagers present different tone when off-hook. I  read the CCM admin guide but didn't find anything about this, only the locale  might affect the tone. Does anyone have idea how to fix it? Any comment would be  grateful. Thanks a lot~ 
 
 
 Regards,
 
 
 Alan