[cisco-voip] Auto dial number (hot phone)

[Lelio Fulgenzi]

Here's how I do it now:

Create a partition called ringdown_to_mymenu_pt
create a searchspace called ringdown_to_mymenu_css and add the above partition to it
create a blank translation in the ringdown_to_mymenu_pt and change the transformed digits to the number you want to dial.
you have to assign the translation a CSS that can reach that transformed number
assign the line/phone the ringdown_to_mymenu_css

you should be good to go.

lelio "what do you mean adding a blank translation in the none partition is bad?" fulgenzi

  ----- Original Message ----- 
  From: Voll, Scott 
  To: cisco-voip at puck.nether.net 
  Sent: Wednesday, February 15, 2006 7:01 PM
  Subject: [cisco-voip] Auto dial number (hot phone)


  OK-

   

  I'm sure it's been asked but can someone send me a link.

   

  If I have a phone and you want it to dial a number soon as it's off hook, how do you do this.  If I have a phone in conference rooms I want it to dial a call handler on Unity and then press number for the different departments.

   

  I think PLAR is the way I do it on a router, but what about a normal IP Phone?

   

  Scott



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060215/98b1722d/attachment-0001.html