[cisco-voip] is there to config "allow vlan 10, 20, 30, 40 on cat500

[Kevin Thorngren]

I might be wrong but in looking at the Cat 500 product data sheet I  
don't see mention of trunking support.  Based on this I would say that  
you won't be able to duplicate your 3550 config on the Cat 500.  The  
data sheet can be found here:
http://www.cisco.com/en/US/products/ps6545/ 
products_data_sheet0900aecd80322aeb.html

Kevin
On Feb 16, 2006, at 5:45 PM, James Grace wrote:

> We have the cat exp 500 and it confusing to config  when you try to  
> match it to the cat 3550  you are replacing.  One of our ports on the  
> 3550 is for an AP with multiple vlans
>  
> Int fa  0/23
>  Switchport access vl 30
>  Switchport trunk enc dot1q
>  Switchport trunk allowed vl 10,20,80
>  Switchport mode trunk
>  
> How do I make this happen on a cat exp 500,  Will the ap role  
> automatically allow this
>  
> James D. Grace
> CCNP CCNA MCSE MCDBA
> Sr. System Engineer / Professional Svc.
> Digitel Corporation
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 2228 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060216/84675bbb/attachment.bin