[cisco-voip] Trace with "dd" and "match" statements

[Ryan Ratliff]

Do you have device based tracing on?

Try setting to default, then changing only the debug trace level to  
detailed.  Remember the default trace settings will move your traces  
back to program files\cisco\trace if you've moved them elsewhere.

-Ryan

On Feb 22, 2006, at 9:13 AM, DeRooy, Aaron H wrote:

I've been seeing/reading trace outputs the show "dd=3", "dd=32"...etc.
as you dial and "potential matches still exist" statements but my CCM
traces don't show that. They just show "keypadbutton kpbutton=2"
statements then device manager statements the a bunch of h323 g/w stuff.
I have detailed level enabled. I had arbitrary enabled at first. When I
switched to detailed, it just added keepalive messages which is what I
expected.
thanks

Aaron H. DeRooy
=



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip