[cisco-voip] Setting up a WS-SVC-CMM for use with CCM 4.1

[Fretz, EA Eric at IS]

No, we actually bought two ACT daughtercards.
 
The main thing I am concerned with is the fact that the card runs its' own
copy of IOS.....which can make switch recovery complicated if the CMM comes
up in ROMMON.  War stories would be nice!
 
Cheers,
Eric

-----Original Message-----
From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Wednesday, February 22, 2006 10:44 AM
To: Fretz, EA Eric @ IS; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Setting up a WS-SVC-CMM for use with CCM 4.1



Upgrade the CMM.  To the latest xy code.  Something like 12.3.8xy6 or later.
It's been very stable for us.

 

Sounds like TAC developers would like me to move to 12.4 but it's hard to
upgrade when it's working.

 

Scott

 

PS.  Anything else you need?  Did you really buy two ACT cards, or are you
referring to the two DSP on the single ACT card?

 

 

 


  _____  


From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Fretz, EA Eric @ IS
Sent: Wednesday, February 22, 2006 8:30 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Setting up a WS-SVC-CMM for use with CCM 4.1

 

We just bought a Cisco Media Module and wanted to know if anyone on the list
has done this before...and what the "gotchas" are.  The CMM has two of the
ACT dsp cards that we plan on using for Meet-Me conferences.  The 6509
switch is running CatOS 8.4 and the CMM blade is running IOS 12.3.8.

 

 

 

 


  _____  


 

Eric Fretz

Eric.A.Fretz at L-3Com.com <mailto:Eric.A.Fretz at L-3Com.com> 

L3 Communications-IS / Greenville, TX

O: 903-457-3646

F: 903-457-1903

C: 214-794-9288

P: 903-621-8090

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060222/619eddbf/attachment.html