[cisco-voip] Caller's display changed when dial through route point/route pattern

[Justin Steinberg]

Henry,

If you modify the calling party number on the Route List instead of
the Route Pattern the IP phone will not update it's screen.

Justin

On 2/24/06, Henry Lum <Henry.Lum at newstep.com> wrote:
>
>
> I notice that when my 7960 IP phone dials through a route point or route
> pattern on that modifies the called party number, the display on the
> caller's device will change accordingly. Is there a way to suppress this
> change and keep the original dialled number on the caller's display?
>
>
>
> I am running CCM 4.1(2).
>
>
>
> Thanks
>
> Henry
>
>
>
> henry lum | product development | newstep networks | 416.979.5404 x230 |
> henry.lum at newstep.com
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>