[cisco-voip] Re: cs3 instead of af31 in CM 3.3.4

[Voll, Scott]

Negative Ghost Rider* in CM 4.1.3 the signaling is CS3. No longer AF31.
This is a known change.

 

Scott

 

*My favorite quote from Top Gun the movie.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matt Slaga (US)
Sent: Monday, February 27, 2006 8:32 AM
To: Voll, Scott; Wes Sisk
Cc: Cisco VoIP
Subject: RE: [cisco-voip] Re: cs3 instead of af31 in CM 3.3.4

 

I think this guy was trying to do the opposite, change the default of
DSCP af31 to CS3.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Monday, February 27, 2006 11:15 AM
To: Wes Sisk
Cc: Cisco VoIP
Subject: RE: [cisco-voip] Re: cs3 instead of af31 in CM 3.3.4

Why did Cisco's default change from DSCP to CS?  Are we going to see
these continue to change for all packets?  Video, audio, etc.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
Sent: Sunday, February 26, 2006 10:09 AM
To: Waleed Samir
Cc: Cisco VoIP
Subject: [cisco-voip] Re: cs3 instead of af31 in CM 3.3.4

 

there is a setting in ccmadmin under service->service parameters to
changes the DSCP bits used for various signaling.

 

/Wes

 

On Feb 26, 2006, at 10:08 AM, Waleed Samir wrote:






Ok Thanks for your guiding

 

 

________________________________

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Sunday, February 26, 2006 5:06 PM
To: Waleed Samir
Subject: Re: cs3 instead of af31 in CM 3.3.4

 

I'm sorry, i do not answer direct questions.  If this is regarding a TAC
case please provide a number, otherwise, plese post your question on the
cisco-voip alias so everyone can benefit from the answer.

 

Thank You,

/Wes

 

On Feb 25, 2006, at 7:35 PM, Waleed Samir wrote:





 

Hi

 

I need to change the setting of the Callmanager 3.3.4 to send the
signaling traffic with CS3 instead of the AF31 to follow the new
standard.

How can I make this change and do you have any documents or links
related to this subject.

Many Thanks

Waleed Samir





 

 

 

 

________________________________

Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060227/f5e76160/attachment-0001.html