[cisco-voip] Re: cs3 instead of af31 in CM 3.3.4

[Wes Sisk]

The ITU (i think that was the standards organization in this case) 
changed their recommendation for how signaling should be classified.

/Wes

Voll, Scott wrote:
>
> Why did Cisco’s default change from DSCP to CS? Are we going to see 
> these continue to change for all packets? Video, audio, etc.
>
> Scott
>
> ------------------------------------------------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Wes Sisk
> *Sent:* Sunday, February 26, 2006 10:09 AM
> *To:* Waleed Samir
> *Cc:* Cisco VoIP
> *Subject:* [cisco-voip] Re: cs3 instead of af31 in CM 3.3.4
>
> there is a setting in ccmadmin under service->service parameters to 
> changes the DSCP bits used for various signaling.
>
> /Wes
>
> On Feb 26, 2006, at 10:08 AM, Waleed Samir wrote:
>
>
>
> Ok Thanks for your guiding
>
> ------------------------------------------------------------------------
>
> *From:* Wes Sisk [mailto:wsisk at cisco.com]
> *Sent:* Sunday, February 26, 2006 5:06 PM
> *To:* Waleed Samir
> *Subject:* Re: cs3 instead of af31 in CM 3.3.4
>
> I'm sorry, i do not answer direct questions. If this is regarding a 
> TAC case please provide a number, otherwise, plese post your question 
> on the cisco-voip alias so everyone can benefit from the answer.
>
> Thank You,
>
> /Wes
>
> On Feb 25, 2006, at 7:35 PM, Waleed Samir wrote:
>
>
>
>
> Hi
>
> I need to change the setting of the Callmanager 3.3.4 to send the 
> signaling traffic with CS3 instead of the AF31 to follow the new standard.
>
> How can I make this change and do you have any documents or links 
> related to this subject.
>
> Many Thanks
>
> Waleed Samir
>
>
>
>
>
>