[cisco-voip] trying to access my router by ssh

Uben Pharten upharten at gmail.com
Tue Feb 28 16:55:08 EST 2006


Or you could use the ssh command in linux.

[localost root]#ssh pix at 10.1.1.1





On 2/28/06, Voll, Scott <Scott.Voll at wesd.org> wrote:
>
>
> I really like TeraTerm with SSH extensions.  Free and small.
>
>
>
> Scott
>
>
> ________________________________
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
> Fretz, EA Eric @ IS
> Sent: Tuesday, February 28, 2006 1:42 PM
> To: 'James Grace'; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] trying to access my router by ssh
>
>
>
>
>
> In order to allow ssh access to your router, you have to setup ssh as an
> input method...
>
>
>
>
>
>
>
>
> so:
>
>
>
>
>
> config terminal
>
>
> (config)line vty 0 1
>
>
> (config-line)transport input ssh
>
>
> (config-line)exec-timeout 9 0
>
>
> (config-line)exit
>
>
> (config)crypto key generate rsa
>
>
> {you need to choose your rsa key size....}
>
>
> (config)exit
>
>
> write mem
>
>
>
>
>
> As usual, if you are using any ACL's on your intended router interface, make
> sure you have a hole poked through the ACL to allow TCP 22 on the router
> interface.
>
>
>
>
>
> PuTTy is a great ssh client for win32 users.......
>
>
>
>
>
> Cheers,
> Eric
>
>
>
>
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
> James Grace
> Sent: Tuesday, February 28, 2006 3:16 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] trying to access my router by ssh
>
> Can someone give me some insight on how to get into my router by ssh
>
> Tac walked be thru on the ssh configuration on my pix and they were able to
> get in.   but I don't know whats the best software to use.  Or how to use
> one
>
>
>
> These are the applied configs
>
>
>
> pixfire(config)# ca gen rsa key 1024
>
> For <key_modulus_size> >= 1024, key generation could
>
>   take up to several minutes. Please wait.
>
> Keypair generation process begin.
>
> ..Success.
>
> pixfirewall(config)# ssh 0.0.0.0 0.0.0.0 outside
>
> : Saved
>
> :
>
> James D. Grace
>
> CCNP CCNA MCSE MCDBA
>
> Sr. System Engineer / Professional Svc.
>
> Digitel Corporation
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>


--
Uben - CCNA



More information about the cisco-voip mailing list