[cisco-voip] cm location

[James Grace]

I just look at the seting and I found that on the region  we had g711 and
video  3000.  now we have video enable on all ip phones, however this is a
new install and no one have cameras  

 

  _____  

From: Kevin Thorngren [mailto:kthorngr at cisco.com] 
Sent: Thursday, December 29, 2005 10:58 AM
To: James Grace
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] cm location 

 

If you place a call between two phones that have None configured for the
Location then you have unlimited bandwidth available. The call won't use one
of the configured Locations. It sounds like another device, Transcoder
maybe, is being invoked that is in one of the configured Locations. CCM
traces will show you what is happening.

Kevin
On Dec 29, 2005, at 10:10 AM, James Grace wrote:

We are having for some issue with not enough bandwidth.  I look at the cm
and we have 2 locataions configured.  But on our phone phones the locations
is set to none.  Now on those two loacation they were config as limit
bandwth on voice and video.   My question is none on the ip phone uses a
default of one the the locations settings.  Just wondering if  this is why
we are having out of bandwidth issues on the phones
 
James D. Grace 
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060101/921f9d7c/attachment.html