[cisco-voip] Cisco Router to Call Manager 3.3

[Voll, Scott]

It is possible but you will need a Transcoder at the central site.  DSP
resources.  We use a CMM ACT card but you can get extra DSP's in most
any router platform.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Heriyadi
Setiono
Sent: Monday, January 02, 2006 10:37 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cisco Router to Call Manager 3.3
Importance: High

Dear Cisco-ers,

In my company would like to develope VoIP connection through WAN to call
Mgr 3.3. 
The design would be 

PSTN -> to FXO Card remote site router 2621 --> VoIP WAN Cloud with
Codec G729br8 -> CM as a MGCP gateway (codec g711).

Is it possible doing this design ? or may be other can help me alternate
solution. 
we're going to reroute remote PSTN line to Call Center Head office so
the customer at remote site can still use local rate.

Best Regards,
Heriyadi

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip