[cisco-voip] Toggling CCM MWI without a phone

[Candace Holman]

In CallManager you can try to turn off MWI for an extension using the 
Line Settings for the device, Message Waiting Lamp Policy set to None or 
Prompt Only.  I've never tested that.  In User Web pages 
(hostname/ccmuser) , a user can select Change Your Message Waiting Lamp 
Policy to Never Light.

Candace


> You can dial the MWI on and off codes form the phones, assuming the 
> phones have a CSS that can call the MWI on and off DNs.  If you have 
> Unity, you can use \Commserver\TechTools\StatusMonitor.exe to toggle 
> MWI.  There are no CCM tools to do this.
>
> Kevin
> On Jan 2, 2006, at 1:43 PM, Justin Steinberg wrote:
>
>> Is it possible to turn off (or on for that matter) the MWI status on a
>> per extension basis using any admin tool?
>>
>> I know that I could register a phone with the DN in question, but I'm
>> looking for a quicker way...ccmadmin, command line, etc...
>>
>> Thanks
>>
>> Justin
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>