[cisco-voip] PSTN to SIP Configuration
Raymond Macharia
rmacharia at gmail.com
Fri Jan 6 04:55:11 EST 2006
Hello Klaus,
Thanks for the link. It pointed me in the right direction and at least now
the as5350 is picking the calls and giving me a tone (not modem tone like
before)
But I have hit another wall, the voip peer is giving me a cause code 57 "bearer
capability not authorized (57)". Not sure whether it is the as5350 or my SIP
proxy server causing this. I have gone through various sites but non give a
proper explanation why this happnes.
I am still going through the sites hoping to find something useful that will
help me sort this out.
Anyone with a clue how to sort this out, this are my current voice
configurations:
________________________________________________________________________________________
voice-port 3/2:D
input gain 14
echo-cancel coverage 32
timeouts wait-release 10
description ISDN PSTN connectvity-TELKOM-2837000
bearer-cap Speech
!
!
!
dial-peer voice 1 pots
shutdown
no digit-strip
direct-inward-dial
port 3/2:D
!
dial-peer voice 2 pots
destination-pattern .+
no digit-strip
port 3/2:D
forward-digits all
!
dial-peer voice 100 voip
huntstop
destination-pattern .+
voice-class codec 1
session protocol sipv2
session target ipv4:192.168.16.53:5060
dtmf-relay rtp-nte
no vad
!
!
sip-ua
sip-server ipv4:192.168.16.53:5060
!
________________________________________________________________________________________
On 1/3/06, Klaus Darilion <klaus.mailinglists at pernau.at> wrote:
>
> Hi Raymond!
>
> Take a look at this project:
> http://www.enum.at/index.php?id=380
>
> The configuration included in
> http://www.enum.at/fileadmin/public/files.zip will show you how to
> configure a Cisco GW.
>
> regards
> klaus
>
> Raymond Macharia wrote:
> > Hello,
> >
> > I am adding a VOICE gateway to my VOIP network so that I can get people
> > who call a number on the PSTN are routed to my SIP plat form via a Cisco
> > AS5350.
> > Currently all I get is the usual modem handshake tone. I am using an
> > ISDN line provided by my Telco.
> > My SIP platform is SER.
> > Since I need to get all calls to this number to be routed into the SIP
> > platform I do not need any destination patterns.
> > Below are details of my AS5350 and the current configuration
> >
> -------------------------------------------------------------------------------------------------
> >
> >
> > as5350#sh ver
> > Cisco Internetwork Operating System Software
> > IOS (tm) 5350 Software (C5350-IS-M), Version 12.3(3g), RELEASE SOFTWARE
> > (fc1)
> > Copyright (c) 1986-2004 by cisco Systems, Inc.
> > Compiled Fri 21-May-04 02:46 by kellythw
> > Image text-base: 0x6000895C, data-base: 0x61600000
> >
> > ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
> > BOOTLDR: 5350 Software (C5350-BOOT-M), Version 12.2(2)XB2, EARLY
> > DEPLOYMENT RELEASE SOFTWARE (fc1
> >
> > as5350 uptime is 4 weeks, 5 days, 1 hour, 50 minutes
> > System returned to ROM by reload at 13:38:28 UTC Mon Feb 14 2000
> > System image file is "flash:c5350-is-mz.123-3g.bin "
> >
> > cisco AS5350 (R7K) processor (revision T) with 262144K/131072K bytes of
> > memory.
> > Processor board ID JAE0848157T
> > R7000 CPU at 250Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3
> Cache
> > Last reset from IOS reload
> > Channelized E1, Version 1.0.
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > SuperLAT software (copyright 1990 by Meridian Technology Corp).
> > Primary Rate ISDN software, Version 1.1.
> > Manufacture Cookie Info:
> > EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x32,
> > Board Hardware Version 3.34, Item Number 800-5171-02,
> > Board Revision C0, Serial Number JAE0848157T,
> > PLD/ISP Version 2.2, Manufacture Date 24-Nov-2004.
> > Processor 0x14, MAC Address 0x012048EE60
> > Backplane HW Revision 1.0, Flash Type 5V
> > 2 FastEthernet/IEEE 802.3 interface(s)
> > 68 Serial network interface(s)
> > 216 terminal line(s)
> > 8 Channelized E1/PRI port(s)
> > 512K bytes of non-volatile configuration memory.
> > 65536K bytes of processor board System flash (Read/Write)
> > 16384K bytes of processor board Boot flash (Read/Write)
> >
> > Configuration register is 0x2102
> >
> > Configurations
> >
> > as5350#sh run
> > Building configuration...
> >
> > Current configuration : 2894 bytes
> > !
> > version 12.3
> > service timestamps debug datetime msec
> > service timestamps log datetime msec
> > service password-encryption
> > !
> > hostname as5350
> > !
> > boot-start-marker
> > no boot startup-test
> > boot-end-marker
> > !
> > !
> > resource-pool disable
> > spe default-firmware spe-firmware-1
> > aaa new-model
> > !
> > !
> > aaa session-id common
> > ip subnet-zero
> > ip cef
> > !
> > isdn switch-type primary-net5
> > !
> > !
> > voice service voip
> > fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
> > sip
> > !
> > voice class codec 1
> > codec preference 1 g729r8
> > codec preference 2 g723r53
> > codec preference 3 g723r63
> > codec preference 4 g711ulaw
> > codec preference 5 g711alaw
> > codec preference 6 g729br8
> > !
> > !
> > no voice hpi capture buffer
> > no voice hpi capture destination
> > !
> > !
> > controller E1 3/0
> > !
> > controller E1 3/1
> > !
> > controller E1 3/2
> > pri-group timeslots 1-31
> > description PSTN Connectivity-TELCO
> > !
> > controller E1 3/3
> > pri-group timeslots 1-31
> > description PSTN 2 Connectivity-TELCO
> > !
> > controller E1 3/4
> > !
> > controller E1 3/5
> > !
> > controller E1 3/6
> > !
> > controller E1 3/7
> > !
> > !
> > interface FastEthernet0/0
> > ip address 192.168.20.1 <http://192.168.20.1> 255.255.255.0
> > <http://255.255.255.0>
> > no ip unreachables
> > no ip proxy-arp
> > ip route-cache policy
> > no ip mroute-cache
> > duplex auto
> > speed auto
> > no cdp enable
> > !
> > interface FastEthernet0/1
> > no ip address
> > shutdown
> > duplex auto
> > speed auto
> > !
> > interface Serial0/0
> > no ip address
> > shutdown
> > clockrate 2000000
> > !
> > interface Serial3/0
> > no ip address
> > channel-id 0
> > !
> > interface Serial0/1
> > no ip address
> > shutdown
> > clockrate 2000000
> > !
> > interface Serial3/2:15
> > description PSTN Connectivity-TELKOM-2837000
> > no ip address
> > encapsulation ppp
> > isdn switch-type primary-net5
> > isdn incoming-voice modem 64
> > isdn bchan-number-order ascending
> > !
> > interface Serial3/3:15
> > description PSTN Connectivity-TELKOM
> > no ip address
> > encapsulation ppp
> > isdn switch-type primary-net5
> > isdn incoming-voice modem 64
> > isdn bchan-number-order ascending
> > !
> > interface Group-Async0
> > no ip address
> > group-range 1/00 2/107
> > !
> > ip classless
> > ip route 0.0.0.0 <http://0.0.0.0> 0.0.0.0 <http://0.0.0.0> 192.168.20.10
> > <http://192.168.20.10>
> > no ip http server
> > !
> > !
> > !
> > snmp-server community accessleaf RO
> > snmp-server enable traps tty
> > !
> > !
> > voice-port 3/3:D
> > cptone KE
> > description ISDN PSTN connectvity-TELKOM
> > bearer-cap Speech
> > !
> > voice-port 3/2:D
> > cptone KE
> > description ISDN PSTN connectvity-TELKOM
> > bearer-cap Speech
> > !
> > !
> > !
> > dial-peer voice 100 voip
> > huntstop
> > destination-pattern .+
> > voice-class codec 1
> > session protocol sipv2
> > session target ipv4:192.168.20.53 <http://192.168.20.53>
> > dtmf-relay rtp-nte
> > !
> > !
> > !
> > line con 0
> > line aux 0
> > line vty 0 4
> > line 1/00 2/107
> > modem InOut
> > !
> > scheduler allocate 10000 400
> > !
> > end
> >
> > as5350#
> >
> >
> > Thank you
> >
> > Regards
> >
> > --
> > Raymond
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
--
Raymond Macharia
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060106/21d4f72d/attachment-0001.html
More information about the cisco-voip
mailing list