[cisco-voip] 6500 - Sup 720 - Cannot Access CMM

[Andrew Dignan]

New CMM so hasn't worked before.  Yes, with 6509 Sup720 has to go in slot
5 or 6 but we only have one and its in slot 5.  I have another site with a
CMM in slot 6 working with no problems.

I can't put it into a new slot til afterhours (i know its hot swap but
need a change request)

> Is this a new CMM blade?  Has this worked before?
>
> Is this a Cat 6509?  Can you put the CMM in slot 6?  I thought that was
> reserved for the redundant sup 720.
>
> Can you change slots?
>
> Scott
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Andrew Dignan
> Sent: Friday, January 06, 2006 9:34 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] 6500 - Sup 720 - Cannot Access CMM
>
> Anyone seen this...  The CMM GigabitEthernet port is configured and the
> mod is inserted (and has been rebooted).  It tries to connect to
> 127.0.0.60 but cannot.
>
> interface GigabitEthernet6/1
>  description CMM Module
>  switchport
>  switchport access vlan 100
>  switchport mode access
>  no ip address
>
> WPUL06-1#session slot 6 processor 0
> The default escape character is Ctrl-^, then x.
> You can also type 'exit' at the remote prompt to end the session
> Trying 127.0.0.60 ...
> % Connection timed out; remote host not responding
>
> --------------------------------------------------------------------
>
> WPUL06-1#show mod
> Mod Ports Card Type                              Model
> Serial
> No.
> --- ----- -------------------------------------- ------------------
> -----------
>   1   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX
> SAL094025U5
>   2   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX
> SAL09380PLK
>   5    2  Supervisor Engine 720 (Active)         WS-SUP720-3B
> SAL09285AZ9
>   6    5  Communication Media Module             WS-SVC-CMM
> SAD0933069W
>   9   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP
> SAD093703AN
>
> Mod MAC addresses                       Hw    Fw           Sw
> Status
> --- ---------------------------------- ------ ------------ ------------
> -------
>   1  0015.63b4.ac64 to 0015.63b4.ac93   2.3   12.2(14r)S5  12.2(18)SXE2
> Ok
>   2  0015.6246.3910 to 0015.6246.393f   2.3   12.2(14r)S5  12.2(18)SXE2
> Ok
>   5  0013.7f0d.60ec to 0013.7f0d.60ef   4.4   8.1(3)       12.2(18)SXE2
> Ok
>   6  0014.69e9.a522 to 0014.69e9.a52b   2.7   12.3(8)XY6,  12.3(8)XY6,
> Ok
>   9  0014.69e9.e798 to 0014.69e9.e7af   2.3   12.2(14r)S5  12.2(18)SXE2
> Ok
>
> Mod Sub-Module                  Model              Serial        Hw
> Status
> --- --------------------------- ------------------ ------------ -------
> -------
>   1 Centralized Forwarding Card WS-F6700-CFC       SAL09391AJP   2.0
> Ok
>   2 Centralized Forwarding Card WS-F6700-CFC       SAD085003UU   2.0
> Ok
>   5 Policy Feature Card 3       WS-F6K-PFC3B       SAL09285AQA   2.1
> Ok
>   5 MSFC3 Daughterboard         WS-SUP720          SAL092756YS   2.3
> Ok
>   9 Centralized Forwarding Card WS-F6700-CFC       SAD0937090J   2.0
> Ok
>
> Mod Online Diag Status
> --- -------------------
>   1 Pass
>   2 Pass
>   5 Pass
>   6 Not Applicable
>   9 Pass
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>