[cisco-voip] Display IE & CCM

[Wes Sisk]

Andre,

Usually CM will pass information included in the DisplayIE to phone  
sets.  Can you send me a complete CCM trace?

/Wes

On Jan 4, 2006, at 4:03 AM, Andre Beck wrote:

Hi,

is there any way for a CCM connected to the PSTN gateway using H.323
to receive incoming INFORMATION messages with a Display IE and display
them to the phone? Like this:

ISDN BR1/0 Q931: RX <- INFORMATION pd = 8  callref = 0x8C
         Display i = '1 Einheiten'

I know CCM cannot deal with AOCE and AOCD (which is bad enough), but it
would already be helpful if those informational messages from the PSTN
could actually make it to the phone display instead of disappearing
somewhere.

TIA,
Andre.
-- 
                   The _S_anta _C_laus _O_peration
   or "how to turn a complete illusion into a neverending money source"

-> Andre Beck    +++ ABP-RIPE +++    IBH Prof. Dr. Horn GmbH, Dresden <-
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip