[cisco-voip] Not Enough Bandwidth - Monitoring ?

[Philip Walenta]

CallManager has something called the "Real Time Monitoring Tool" (RTMT for
short).
 
This tool can be found under the CCMAdmin application menu -> CallManager
Serviceability.
 
Once there, go into the tools then find "Real-Time Monitoring Tool".
 
This tool will allow you to see and set alerts on just about anything in
CallManager including Locations bandwidth in use etc.


  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of TechGuy
Sent: Tuesday, January 10, 2006 2:43 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Not Enough Bandwidth - Monitoring ?


So we have 5 locations setup in CallManager, we have the locations setup to
utilize the bandwidth restrictions available.  After a month of utilizing
this today I finally get reports that users are running into the "Not Enough
Bandwidth" message when trying to complete calls. 
 
Wondering if there is an easy way to determine / see active calls taking
place between these locations?  Obviously callmanager is aware of the calls
since it can determine whether their is enough bandwidth or not, but I am
unsure of anything that allows you to see this information easily. 
 
Anyone?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060110/9d04b28d/attachment.html