[cisco-voip] Not Enough Bandwidth - Monitoring ?

[Bell, Joe]

Try CallManagers PerfMon too.  You can get massive amounts of great info
from perfmon.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of TechGuy
Sent: Tuesday, January 10, 2006 12:43 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Not Enough Bandwidth - Monitoring ?

 

So we have 5 locations setup in CallManager, we have the locations setup
to utilize the bandwidth restrictions available.  After a month of
utilizing this today I finally get reports that users are running into
the "Not Enough Bandwidth" message when trying to complete calls. 

 

Wondering if there is an easy way to determine / see active calls taking
place between these locations?  Obviously callmanager is aware of the
calls since it can determine whether their is enough bandwidth or not,
but I am unsure of anything that allows you to see this information
easily. 

 

Anyone?



This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060110/03593fcf/attachment.html