[cisco-voip] cant dial into a modem using an fxs port

[James Grace]

I don't see where to check fax passthrough on the fxs configurations   live
look on the line and device config page 

 

  _____  

From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Wednesday, January 11, 2006 6:13 PM
To: James Grace; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] cant dial into a modem using an fxs port 

 

Are they set to fax passthrough?  I could see this happening with Fax Relay.

 

Scott

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Wednesday, January 11, 2006 2:56 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] cant dial into a modem using an fxs port 

 

We are running cm 4.1.3 w/sr 1.  we have a 2821 voice gw with a 8 prt fxs
module.  The port work except for one issue.  We are not able to use these
ports to dial into modems or pbx systems.  They dial up... try to establish
connection and then disconnect.

 

 

 

James D. Grace 

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060112/20a3d40a/attachment-0001.html