[cisco-voip] Centralized Unity QOS

[Ortiz, Carlos]

Anyone else have a centralized Unity setup?  I occasionally have users
across a T1 (Frame) complain that their messages are garbled.  I have
QOS applied to the remote T1 location outbound,  and outbound from the
remote location back to HQ.  Basically I am giving priority to port 2000
upon exiting the remote router.  What else would Unity need prioritized
to make sure messages are getting through? Here is the show policy map
command.  Notice the Voice Class has  shows one drop.

 

Class-map: Voice-Class (match-any)

  13837884 packets, 1568348294 bytes

  5 minute offered rate 0 bps, drop rate 0 bps

  Match: access-group name Voice-ACL

    8214782 packets, 421778111 bytes

    5 minute rate 0 bps

  Match: ip precedence 5

    5623104 packets, 1146570431 bytes

    5 minute rate 0 bps

  Match:  dscp ef (46)

    0 packets, 0 bytes

    5 minute rate 0 bps

  Queueing

    Strict Priority

    Output Queue: Conversation 264

    Bandwidth 768 (kbps) Burst 19200 (Bytes)

    (pkts matched/bytes matched) 1323128/78512368

    (total drops/bytes drops) 1/1171

 

 

Carlos Ortiz

Senior Information Technology Specialist

Broward County Office of Information Technology

Data Communications

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060112/8c280749/attachment-0001.html