[cisco-voip] BRI Voice Interface Card

[Philip Walenta]

I should add this as a general rule of thumb, anything "VIC" is pretty much
voice.  Anything "WIC" is data.  The oddball are the VIC-MFT's, as they can
do either data and voice, or data and voice simultaneously (not on the same
T1 though).


  _____  

From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Thursday, January 12, 2006 11:34 AM
To: Philip Walenta; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] BRI Voice Interface Card



Ordered wrong thing.  They are sending me the right one now.

 

Scott

 


  _____  


From: Philip Walenta [mailto:pwalenta at wi.rr.com] 
Sent: Thursday, January 12, 2006 9:29 AM
To: Voll, Scott; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] BRI Voice Interface Card

 

The difference is that the WIC is designed for Data only.  The VIC is
specifically designed for voice.  I'm not sure if the VIC can do data.

 


  _____  


From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Thursday, January 12, 2006 11:22 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] BRI Voice Interface Card

I have never installed a BRI Voice Circuit before so Apologizes if this is
basic.

 

Is there a difference between a WIC BRI Card and a VIC BRI Card?  Can I use
a WIC BRI Card for a two channel Voice Circuit for my CM VGW?

 

Thanks

 

Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060112/974a256d/attachment.html