[cisco-voip] 7914 with 7970

[Lelio Fulgenzi]

I remember a notice whereby you had to upgrade the 7914 before you could attach it to the latest firmware version on the 7960. What we had to do was downgrade a phone, attach the 7914, upgrade the 7914, then upgrade the phone back to the latest firmware.

Bit of a drag. I'm pretty sure we had solid reds.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I had a coffee and Coke at lunch today...and now, I've got more jitter than an
IP phone on a long haul 10base2 connection"                                           LFJ
  ----- Original Message ----- 
  From: Voll, Scott 
  To: cisco-voip at puck.nether.net 
  Sent: Thursday, January 12, 2006 1:34 PM
  Subject: [cisco-voip] 7914 with 7970


  Hello all-

   

  I just got our agency's first 7914 and I'm trying to attack it to a 7970.

   

  Physically it is all setup.  It powers up and I can configure the 7970 but the buttons on the 7914 are all solid red.

   

  All documentation I find says:

   

  Buttons on the first Expansion Module 7914 are all red.

   

  Then

   

  Verify with your system administrator that your Expansion Module 7914 is defined in Cisco CallManager.

   

  In CM on the 7970 I have assigned the 7914 as the first module.  How else do I define it in CM?  Any help would be great.

   

  TIA

   

  Scott

   



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060112/d0213c7c/attachment.html