[cisco-voip] 7914 with 7970

[Voll, Scott]

That fixed it...... THANKS

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Thursday, January 12, 2006 11:10 AM
To: erickbe at yahoo.com; Lelio Fulgenzi; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 7914 with 7970

Thanks.... I'll update the 7970.

-----Original Message-----
From: Erick Bergquist [mailto:erickbe at yahoo.com] 
Sent: Thursday, January 12, 2006 11:09 AM
To: Lelio Fulgenzi; Voll, Scott; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 7914 with 7970

Also, 7970 needs to be on 7.02 firmware or better
7914 load/firmware is S00104000100

--- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> I remember a notice whereby you had to upgrade the
> 7914 before you could attach it to the latest
> firmware version on the 7960. What we had to do was
> downgrade a phone, attach the 7914, upgrade the
> 7914, then upgrade the phone back to the latest
> firmware.
> 
> Bit of a drag. I'm pretty sure we had solid reds.
> 
>
------------------------------------------------------------------------
--------
> Lelio Fulgenzi, B.A.
> Network Analyst (CCS) * University of Guelph *
> Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> "I had a coffee and Coke at lunch today...and now,
> I've got more jitter than an
> IP phone on a long haul 10base2 connection"         
>                                  LFJ
>   ----- Original Message ----- 
>   From: Voll, Scott 
>   To: cisco-voip at puck.nether.net 
>   Sent: Thursday, January 12, 2006 1:34 PM
>   Subject: [cisco-voip] 7914 with 7970
> 
> 
>   Hello all-
> 
>    
> 
>   I just got our agency's first 7914 and I'm trying
> to attack it to a 7970.
> 
>    
> 
>   Physically it is all setup.  It powers up and I
> can configure the 7970 but the buttons on the 7914
> are all solid red.
> 
>    
> 
>   All documentation I find says:
> 
>    
> 
>   Buttons on the first Expansion Module 7914 are all
> red.
> 
>    
> 
>   Then
> 
>    
> 
>   Verify with your system administrator that your
> Expansion Module 7914 is defined in Cisco
> CallManager.
> 
>    
> 
>   In CM on the 7970 I have assigned the 7914 as the
> first module.  How else do I define it in CM?  Any
> help would be great.
> 
>    
> 
>   TIA
> 
>    
> 
>   Scott
> 
>    
> 
> 
> 
>
------------------------------------------------------------------------
------
> 
> 
>   _______________________________________________
>   cisco-voip mailing list
>   cisco-voip at puck.nether.net
>  
> https://puck.nether.net/mailman/listinfo/cisco-voip
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip