[cisco-voip] CM 3.3(4) adding hardware MTP and CFB with same MAC

[Brian Henry]

Here is a link that has the old way and then within side that has a link to the enhanced ios way.
 
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080334294.shtml
 
Brian

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Ortiz, Carlos
Sent: Fri 1/13/2006 8:57 AM
To: Kevin Thorngren; andy at dignans.com
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CM 3.3(4) adding hardware MTP and CFB with same MAC



Kevin,

Since you guys are on th topic, do you have any links that specifically
talk about configuring DSP resources on the router and then adding them
to call mgr as CFB, Transcoding and MTP resources. 

Thanks

Carlos

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kevin Thorngren
Sent: Friday, January 13, 2006 8:44 AM
To: andy at dignans.com
Cc: CiscosupportUpuck <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] CM 3.3(4) adding hardware MTP and CFB with
same MAC

Sounds like you are choosing the option to add a "Cisco Conference
Bridge Hardware" (used for 6608).  For an IOS router you will need to
select "Cisco IOS Conference Bridge".  The same goes for MTP.  This
will allow you to add the CFB or MTP by using the name (CFB<mac
address>) instead of the MAC Address.

Kevin
On Jan 13, 2006, at 1:01 AM, Andrew Dignan wrote:

> Sorry, this is for 3.3(3) not 3.3(4) which doesn't have the "enhanced
> ios"
> conference bridge and transcoder which can be configured with a name
> that
> matches in IOS and CallManager.
>
> I know I have done this in 3.3(3) before cuz I have a bunch of IOS
> configs
> that has:
>
> dspfarm transcoder maximum sessions 2
> dspfarm confbridge maximum sessions 2
>
> but I can't remember how to configure it in CM.
>
>> I believe you'll want to use the new format for talking SCCP to CM. 
>> Thes
>> newer profile based format allows you to set a name that CM will
>> recognize.
>> Unfortunately I can't find the link that describes this.
>>
>> -----Original Message-----
>> From: cisco-voip-bounces at puck.nether.net
>> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Andrew
Dignan
>> Sent: Thursday, January 12, 2006 11:27 PM
>> To: cisco-voip at puck.nether.net
>> Subject: [cisco-voip] CM 3.3(4) adding hardware MTP and CFB with same

>> MAC
>>
>> Been so long since I added a hardware cfb and mtp instead of the
>> enhanced
>> IOS cfb/mtp.
>>
>> I am trying to add a hardware cfb and mtp.  The problem I am having
is
>> that
>> obviously I will have the same MAC address for both because it will
>> be the
>> interface sccp is associated with.
>>
>> I can add the CFB but when I try to add the MTP with the same mac I
>> get an
>> error a device with the same MAC exists (CFB11111111111).  Shouldn't
>> they
>> be
>> different because its prefixed with MTP?  What am I missing?
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060113/767af18a/attachment.html