[cisco-voip] Caller ID between 2 voip system

[Wes Sisk]

looks like the remote site may not have external phone number mask  
configured properly.

the remote site sends ISDN STATUS messages with DISPLAYIE to update  
the display on your local phone the then connected party device  
number changes. remote CM should use the DN+external phone number  
mask to generate FQDN to send to your local system.

/Wes

On Jan 12, 2006, at 9:57 AM, François T. - Liste de distribution wrote:

Hi,

We are using a call manager at my office and when we are trying to reach
a remote call manager trough the PSTN, I can see the internal extension
on my phone when the call is connected. We are both using PRI with  
dms-100.

1. I dial 5551212, phone displays (To 5551212)
2. The call gets answer by the remote system, phone displays (To [unity
extension])
3. I enter the extension I want to reach (5555) , phone displays (To  
5555)

This issue only happens when the calling party and the called party are
using Call Manager.

Is there any way to prevent this?

Thanks.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip