[cisco-voip] BRI Voice Interface Card

[Wes Sisk]

good catch.

vic = voice
wic = wan (data) only
vwic = both.

i believe there is hw difference between vic and wic but only nominal  
if any diff btwn vic and vwic.  some extra bus architecture for  
transporting data DSP.

this is only suspicion, don't have schematic to back it up :(

/Wes

On Jan 13, 2006, at 7:55 AM, Andre Beck wrote:

On Thu, Jan 12, 2006 at 11:36:18AM -0600, Philip Walenta wrote:
> I should add this as a general rule of thumb, anything "VIC" is  
> pretty much
> voice.  Anything "WIC" is data.  The oddball are the VIC-MFT's, as  
> they can
> do either data and voice, or data and voice simultaneously (not on  
> the same
> T1 though).

That's still consistent nomenclature insofar as they are actually called
VWIC-*MFT ;)

-- 
                   The _S_anta _C_laus _O_peration
   or "how to turn a complete illusion into a neverending money source"

-> Andre Beck    +++ ABP-RIPE +++    IBH Prof. Dr. Horn GmbH, Dresden <-
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip