[cisco-voip] PI (Presentation Indicator) on CME

[Brian Henry]

What is your layout look like

AS5300 - ISDN-PRI                  AS5350 - ISDN-PRI

3660 - CME with CUE?

Can you describe the two different call scenerio's that you happen
between the one that works and the one that does not work?

If you want to send the config I could look it over. Version of CME? And
Version of CUE? Or Unity if you are linking CME into that.

Brian

-----Original Message-----
From: Sean Watkins [mailto:sean at northrock.bm] 
Sent: Thursday, January 19, 2006 3:30 PM
To: Brian Henry; Sean Watkins; 'cisco-voip at puck.nether.net'
Subject: RE: [cisco-voip] PI (Presentation Indicator) on CME

Interesting

Looks like these commands just affect the Calling Party ID?

Here is my setup. See the Redirecting Number i = '!', 0x0082, in setup
#1,
this is what needs to change to what I have in #2.


Setup #1

Jan 19 14:54:01  831276: Jan 19 14:54:01 AST: ISDN Se3/1:23 Q931: TX ->
SETUP pd = 8  callref = 0x6BBD 
Jan 19 14:54:01 831277:        Bearer Capability i = 0x8090A2 
Jan 19 14:54:01  831278:                Standard = CCITT 
Jan 19 14:54:01  831279:                Transfer Capability = Speech  
Jan 19 14:54:01  831280:                Transfer Mode = Circuit 
Jan 19 14:54:01  831281:                Transfer Rate = 64 kbit/s 
Jan 19 14:54:01  831282:        Channel ID i = 0xA98384 
Jan 19 14:54:01  831283:                Exclusive, Channel 4 
Jan 19 14:54:01  831284:        Progress Ind i = 0x8183 - Origination
address is non-ISDN  
Jan 19 14:54:01  831285:        Calling Party Number i = 0xA1, 'X' 
Jan 19 14:54:01  831286:                Plan:ISDN, Type:National 
Jan 19 14:54:01  831287:        Called Party Number i = 0xA1, 'Y' 
Jan 19 14:54:01  831288:                Plan:ISDN, Type:National 
Jan 19 14:54:01 831289:        Redirecting Number i = '!', 0x0082, 'Z' 
Jan 19 14:54:01  831290:                Plan:ISDN, Type:National

I need it to look like

Setup #2

 19 15:09:00  832312: Jan 19 15:09:00 AST:   Transfering to voicemail 
Jan 19 15:09:00  832313: Jan 19 15:09:00 AST: ISDN Se3/0:23 Q931: TX ->
SETUP pd = 8  callref = 0x6BD8 
Jan 19 15:09:00  832314:        Bearer Capability i = 0x9090A2 
Jan 19 15:09:00 832315:                Standard = CCITT 
Jan 19 15:09:00  832316:                Transfer Capability = 3.1kHz
Audio 
Jan 19 15:09:00  832317:                Transfer Mode = Circuit 
Jan 19 15:09:00  832318:                Transfer Rate = 64 kbit/s 
Jan 19 15:09:00  832319:        Channel ID i = 0xA98385 
Jan 19 15:09:00  832320:                Exclusive, Channel 5 
Jan 19 15:09:00  832321:        Progress Ind i = 0x8483 - Origination
address is non-ISDN  
Jan 19 15:09:00  832322:        Calling Party Number i = 0x2183, 'X1' 
Jan 19 15:09:00  832323:                Plan:ISDN, Type:National 
Jan 19 15:09:00  832324:        Called Party Number i = 0xA1, 'Y' 
Jan 19 15:09:00  832325:                Plan:ISDN, Type:National 
Jan 19 15:09:00  832326:        Redirecting Number i = 0x010081, 'Z2' 



Sean
 

-----Original Message-----
From: Brian Henry [mailto:Brian.Henry at apptis.com] 
Sent: Thursday, January 19, 2006 4:08 PM
To: Sean Watkins; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] PI (Presentation Indicator) on CME

Did you look at these commands
xxx-xxxx(config-dial-peer)#clid ?
  network-number  To provide Network Provided Number
  restrict        To restrict presentation of caller ID
  strip           To remove calling party number entirely


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Sean Watkins
Sent: Thursday, January 19, 2006 2:59 PM
To: 'cisco-voip at puck.nether.net'
Subject: [cisco-voip] PI (Presentation Indicator) on CME

Hi,

I have bunch of 7960 phones, a 3660 running CME, and a few 5350/5300s
with
ISDN interfaces used to gateway to the PSTN.

I'm running into some odd problems with voicemail when either the
5350/5300
decides to set the Presentation Indicator (PI) to be Allowed/Private. 

Is there any way to force the PI to be a specific value all the time in
a
dial-peer?

Sean
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip