[cisco-voip] How to reset Router

[Fretz, EA Eric at IS]

If you have console access to the router but you forgot the password, there
is a documented "break-in" procedure.  Basically, connect a console cable to
the console port on the router, turn it on and start sending the break key
after you see the bootloader banner.
 
This will allow you to get to a prompt to re-run the router setup and bypass
the enable password.  Then do a "writer erase" and you are good to go. 


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ruben Montes (EU)
Sent: Monday, January 23, 2006 4:52 AM
To: Uthayakumar,Sasikumar [DBA]; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] How to reset Router 



Hi,

 

Issue the command 'write erase' and then reload the router to restore
initial default configuration.

 

Regards,

 

Ruben

 


  _____  


De: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] En nombre de
Uthayakumar,Sasikumar [DBA]
Enviado el: lunes, 23 de enero de 2006 11:39
Para: cisco-voip at puck.nether.net
Asunto: [cisco-voip] How to reset Router 

 

Hi,

            How to reset the values of a cisco 2600 Router to its default
values.

 

  Best Regards,

SASIKUMAR.U | Programmer Analyst 

Dexterity Business Analysts (P) Ltd |  <http://www.dexterity.in/>
www.dexterity.in

Phn off: +91 44 5229 0000 |Extn 1231|Fax: +91 44 5229 0099

 

Confidentiality Notice 

 

The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain confidential or privileged information. If you are not the intended
recipient, please notify the sender at Dexterity or
<mailto:contactus at dexterity.in> contactus at dexterity.in immediately and
destroy all copies of this message and any attachments.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060123/61217137/attachment.html