[cisco-voip] 7920 shared Line

[Bill Riley III]

Hold and resume worked. I guess I should have tried the simple things
first. Thanks for everyone's help. 

 

________________________________

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Monday, January 23, 2006 11:54 AM
To: Bill Riley III
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 7920 shared Line

 

7920 does not support barge.

you would need to place the call on hold and then resume or use cbarge.

/Wes

Bill Riley III wrote: 

I have a two 7920 wireless phones for technical support personnel so
they may walk around the building and still be reached by an internal
extension. We have this DN shared with their desk phone, a 7940, so they
may always be reached at the same extension. I need to be able to
receive a call on my desk 7940 and then be able to move it to the 7920
phone so I can walk around to the server room and other parts of the
building. The customer is saying that when they are on the 7920 phone
they see a barge soft key but it does not do anything. Is it possible to
take the call from the desk phone and "move" it on to the wireless phone
and vice versa? I would rather not setup a park slot but will if that is
the only solution. Any advice would be appreciated. 

 

Thanks,

Bill Riley

Network Engineer

briley at jackhenry.com

 

 

 



________________________________



 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060123/16eb872e/attachment.html